Nice catch! We need to update that. Apologies... The Interface Wiring map shows the max and desired outputs... I suppose we just picked the lower of t...
1. No.. you do not need to tie +5V to Aref if you are not using analog. We recommend it while you are wiring to make it easy ahead of time, but that's...
Yessir... we have a predictive hysteresis update in the list of projects. We are working on V1.1, which will not have it just yet, but I agree it woul...
Hi, You can physically change the connection method. However, when you change the selected interface map, the device elements associated with the inte...
Good point! This is not on our list but we will discuss it internally. I suppose we cold just have duplicate elements but would need to work through t...
Yessir! This is slated for v1.1! It is taking us longer than we thought to get it put together since we keep working on squashing bugs that pop up, bu...
First... no problem reaching out for help... its why we are here. Since the output worked on a port with a Digital Output, it should have worked with ...
Absolutely. I cannot speak to the accuracy or repeatability you will see, but measuring the output of the sensor is easy enough. The output of the sen...
Absolutely. I cannot speak to the accuracy or repeatability you will see, but measuring the output of the sensor is easy enough. The output of the sen...
Absolutely. I cannot speak to the accuracy or repeatability you will see, but measuring the output of the sensor is easy enough. The output of the sen...
I believe GPIO 5 is pin D1 on the NodeMCU. Please re-wire and restart the NodeMCU to read the sensors. Alternative to power cycling, you can send a %3...
Hi all, We pushed an update tonight which addresses the aforementioned inappropriate virus-scanner flagging issue. This version 1.0 Build 28097 is now...
Ok thanks. 70/140/1 would be way too aggressive. The kI of 140 alone will immediately cause the integral component to pin the needle to either peg qui...
Good question. Let me discuss it with the dev team!
Are you saying it never reports a power percentage between 0 and 100? Can you provide more specific details? Kettle confit, probe type, and the parame...