Hi FuryNut, Sounds like you are off to a good start with planning. Regarding the Windows server - that is a brilliant way to do this. BruControl can r...
Hi Jon, Yes, you map whichever index to whichever virtual port you desire. This way when you add or subtract sensors, you can just adjust the index an...
Hi Tom, I posted a spreadsheet you can use to perform the calibration. It is here:/p> Let me know if you need any help!
Hi Tom, Glad to hear! If you don't mind the delay, I will do a whole write-up tonight on how to do the pressure sensor setup including calibration, wi...
No, I don't think so. Sorry. We can't compile for Linux right now. You can run it on a remote Windows computer and use Chrome to remote into it. I do ...
Hi Tracer, I can appreciate your frustration. Trust we'll figure it out. Yes, the system will work with multiple sensors. Here is my list of ways to r...
My apologies... I hope I understand your question better here. 1-wire sensors are indexed upon interface boot-up. They are indexed from 0 upward. So i...
Hi, Yes, the best way is trial and error. Unfortunately this is the best way as there is no marking on the sensor itself. Even it it had one, the sens...
That'll do it! Glad you found the solution!
Absolutely! The flowmeter I have been using is an inexpensive unit which I originally purchased just to do testing with, but it worked so well I put i...
Thank you. You have a good plan! Please let us know how we can help you with anything!
Don't be silly - that's what we are here for! FYI I just posted my brewery code in this forum. It is not commented, but you can see it and probably wo...
Hi tracer, As you know, we don't use proprietary hardware, so no problem getting or replacing boards. The recommended Arduino MEGA runs as little as $...