Yes, sorry. 1-wire sensors cannot be calibrated back to the sensor. In the case of thermistors and RTD's, the temp calculation is made by the applicat...
We have seen this happen if you used some funky cut and pasted text. Please cut and paste your script from Notepad only. Copy / paste there... then de...
Known problem! We are working on a method to adjust this.
No, you don't need a sleep if there is some buffer time sitting on a wait.
That’s brilliant!! I actually solved an aberrant reset problem with an open reset pin on a feather by tying it with a capacitor... seems similar.
Then either a very short cycle length or a proportional SSR.
Good idea. You should have some sleep time in there to keep the cpu from running flat out.
Sorry, thought I responded to this. You can use a proportional SSR and get steady-State modulated Output. What do you mean by ‘Oscillation issues?’
No, not yet. Need to declare a variable, count up and check the amount to escape a loop. Not quite as elegant but only one or two lines more.
You should not change the Name of an Element. I realize by your post it will accept it in scripting... but this should be a read-only.
No, not yet. We will be creating a “Communication Element” where you can pass information through different connections. That said, and while we want...
2 and 4 line LCDs are supported. We will enable general communication with other devices in the future.
All well said above, @DieBeerery.
9V wall wart... is it a switching power supply (aka quality) or just a regular one (the weight is often a hint, with heavy being junky linear or non-s...