I built the background image in Paint 3D
@exoticatom In my case "Wifi" is the name of the Interface that BruControl connects to. the LCD display command requires you specify the interface tha...
@exoticatom No problem. For the switch colors, they are determined by your theme which you can change in Settings -> Environment -> Theme
@exoticatom Here are my scripts. If there are any you don't understand just let me know. Scripts.txt
@exoticatom No problem, I will send them this afternoon after work. There are quite a few and they are all stored in the configuration file.
Here is my workspace. The beauty is you can modify it at will very quickly so I am sure this will change over time. Some of the stuff on here is for t...
I'm in the middle of my build and will try to get something posted soon. There is a very active channel over at homebrewtalk.com with some long term u...
Depending on the number of sensors and run length, you might want to power the sensors with 5V instead of 3v3
Roger, You will have an upfront cost for the controller software but it really is worth every penny. The GUI is drag and drop and the scripting is s...
@pbruno3 No problem there, the thermowell extends below the RIMs exit into the MT
I gotta say, that QuadZilla is pretty cool. My RIMs tube is 15 3/4" long from flange-to-flange which means my temp probe thermowell would protrude dow...
What about changing the Appearance -> Value -> Back color or front color values? They don't seem to be exposed to scripts
@pbruno3 I resolved it but I'm not sure why it worked. I switched the MOSFET ground from the breadboard rail to a ground pin on the shield.
It's a temp setup for testing/learning....I have good power supplies for my enclosure once I get my design down