I get the following when trying to install firmware:
1 - BruControl.45H.MEGA.E.hex
2 - BruControl.45H.MEGA.S.hex
3 - BruControl.45H.MEGA.W.hex
- Which firmware to upload (select by number above):2
Press any key to continue . . .avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg WunschSystem wide configuration file is "avrdude.conf"
Using Port : COM3
Using Programmer : wiring
Overriding Baud Rate : 115200
avrdude: ser_open(): can't open device "\\.\COM3": Access is denied.avrdude: ser_drain(): read error: The handle is invalid.
Any help would be appreciated. Attached file shows my Device Manager.
Another program is accessing the COM port simultaneously... do you have the Terminal (termite) open too?
@pbruno3 Thanks, yes the BruControl application was running with a digital output to the COM port....duh.