Forum

Notifications
Clear all

Output state displays only "-----" and does not indicate OFF or ON

5 Posts
2 Users
0 Likes
41 Views
(@hopgoblin)
Active Member
Joined: 3 months ago
Posts: 11
Topic starter  

Hi,

I have been finding the status indicator of my outputs a little flakey.  Sometime they work, sometimes most of them work and sometime all of them just display "-----" and do not indicate OFF or ON,

Most interestingly, if I click "-----", the state of the output does change from off to on and vice versa.

my flowmeters also lost status of count and rate.

see attached photo.

any clues?

 


   
Quote
(@pbruno3)
Reputable Member Admin
Joined: 6 years ago
Posts: 341
 

Very hard to debug with just this information. Is the computer losing connection with the interface? What is the connection type? Take a look at the logs (in the Documents/BruControl/Logs folder and see if there are multiple disconnection/reconnections reported.


   
ReplyQuote
(@hopgoblin)
Active Member
Joined: 3 months ago
Posts: 11
Topic starter  

Thanks.  The computer does not seem to be losing connection.  It's connected via USB on COM4.  There are no cases of disconnect in the logs other than when I was rebooting devices yesterday to try to resolve the issue.  I will connect via ethernet tonight and see if that makes a difference.

Here are the full logs from today from just running my mash/lauter script.

controller log

16:23:01.518: File created 11-09-2022
16:23:01.522: Alarm 'Brew Alarm' activated
16:23:02.919: Alarm 'Brew Alarm' deactivated
16:28:27.866: Alarm 'Brew Alarm' activated
16:28:30.822: Alarm 'Brew Alarm' deactivated

 

licensing log

00:33:11.134: File created 11-09-2022
00:33:11.134: Attempting to synchronize local license with server...
00:33:11.618: Server response successful. License status: OK
12:33:11.638: Attempting to synchronize local license with server...
12:33:12.138: Server response successful. License status: OK

 

Thanks


   
ReplyQuote
(@hopgoblin)
Active Member
Joined: 3 months ago
Posts: 11
Topic starter  

here is the device.com log as well.  Maybe it means something to the group?

16:31:46.596: File created 11-09-2022
16:31:46.610: Connected
16:31:56.650: Tx: /25/30/31/32/33/34/35/36!6,1,0,0,-1,0!7,1,0,0,-1,0!8,1,0,0,-1,0!9,1,1,0,-1,0!10,1,1,0,-1,0!11,1,0,0,-1,0!12,1,1,0,-1,0!22,1,0,0,-1,0!2,9,1!3,9,1!27,1,1,0,-1,0!28,1,0,0,-1,0!200,10,0,1!201,10,0,1!202,10,0,1!203,10,0,1!14,1,0,0,-1,0!13,1,1,0,-1,0!37,1,1,0,-1,0
16:31:56.689: Rx: /#/#/#/#/#/#/#/#!6,1,0,0,-1,0!7,1,0,0,-1,0!8,1,0,0,-1,0!9,1,1,0,-1,0!#!11,1,0,0,-1,0!12,1,1,0,-1,0!22,1,0,0,-1,0!2,9,1!3,9,1!27,1,1,0,-1,0!28,1,0,0,-1,0!200,10,#,#!201,10,#,#!202,10,#,#!203,10,#,#!14,1,0,0,-1,0!13,1,1,0,-1,0!37,1,1,0,-1,0
16:31:57.703: Tx: ?6?7?8?9?10?11?12?22?2?3?27?28?200?201?202?203?14?13?37
16:31:57.719: Rx: ?#?#?#?#?#?#?#?#?#?#?#?#?#?#?#?#?#?#?#
16:31:58.720: Tx: ?2?3?200?201?202?203
16:31:58.735: Rx: ?#?#?#?#?#?#
16:31:59.747: Tx: !6,1,1,0,-1,0?2?3?200?201?202?203
16:31:59.763: Rx: !6,1,1,0,-1,0?#?#?#?#?#?#
16:32:00.764: Tx: ?6?2?3?200?201?202?203
16:32:00.779: Rx: ?#?#?#?#?#?#?#
16:32:01.788: Tx: ?2?3?200?201?202?203
16:32:01.803: Rx: ?#?#?#?#?#?#
16:32:02.813: Tx: ?2?3?200?201?202?203
16:32:02.828: Rx: ?#?#?#?#?#?#
16:32:03.829: Tx: ?2?3?200?201?202?203
16:32:03.844: Rx: ?#?#?#?#?#?#
16:32:04.863: Tx: !7,1,1,0,-1,0!27,1,0,0,-1,0!37,1,1,0,-1,0?2?3?200?201?202?203
16:32:04.890: Rx: !7,1,1,0,-1,0!27,1,0,0,-1,0!37,1,1,0,-1,0?#?#?#?#?#?#
16:32:05.904: Tx: ?7?2?3?27?200?201?202?203?37
16:32:05.920: Rx: ?#?#?#?#?#?#?#?#?#
16:32:06.933: Tx: ?2?3?200?201?202?203
16:32:06.949: Rx: ?#?#?#?#?#?#
16:32:07.956: Tx: ?2?3?200?201?202?203
16:32:07.972: Rx: ?#?#?#?#?#?#
16:32:08.983: Tx: ?2?3?200?201?202?203
16:32:08.999: Rx: ?#?#?#?#?#?#
16:32:10.004: Tx: /6/7/8/9/10/11/12/22/2/3/27/28/13/37?200?201?202?203
16:32:10.020: Rx: /#/#/#/#/#/#/#/#/#/#/#/#/#/#?#?#?#?#
16:32:11.032: Tx: ?200?201?202?203
16:32:11.047: Rx: ?#?#?#?#
16:32:12.055: Tx: ?200?201?202?203
16:32:12.071: Rx: ?#?#?#?#
16:32:13.086: Tx: ?200?201?202?203
16:32:13.102: Rx: ?#?#?#?#
16:32:14.115: Tx: ?200?201?202?203
16:32:14.131: Rx: ?#?#?#?#
16:32:15.142: Tx: ?200?201?202?203
16:32:15.157: Rx: ?#?#?#?#
16:32:16.166: Tx: ?200?201?202?203
16:32:16.182: Rx: ?#?#?#?#
16:32:17.183: Tx: ?200?201?202?203
16:32:17.199: Rx: ?#?#?#?#
16:32:18.204: Tx: ?200?201?202?203
16:32:18.220: Rx: ?#?#?#?#
16:32:19.232: Tx: ?200?201?202?203
16:32:19.248: Rx: ?#?#?#?#
16:32:20.257: Tx: ?200?201?202?203
16:32:20.273: Rx: ?#?#?#?#
16:32:21.285: Tx: ?200?201?202?203
16:32:21.301: Rx: ?#?#?#?#
16:32:22.302: Tx: /202!27,1,1,0,-1,0!28,1,0,0,-1,0!14,1,1,0,-1,0?200?201?203
16:32:22.333: Rx: /#!27,1,1,0,-1,0!28,1,0,0,-1,0!14,1,1,0,-1,0?#?#?#
16:32:23.343: Tx: ?27?28?200?201?203?14
16:32:23.359: Rx: ?#?#?#?#?#?#
16:32:24.367: Tx: ?200?201?203
16:32:24.382: Rx: ?#?#?#
16:32:25.395: Tx: ?200?201?203
16:32:25.410: Rx: ?#?#?#
16:32:26.418: Tx: ?200?201?203
16:32:26.433: Rx: ?#?#?#
16:32:27.447: Tx: !28,1,1,0,-1,0?200?201?203
16:32:27.463: Rx: !28,1,1,0,-1,0?#?#?#
16:32:28.474: Tx: ?28?200?201?203
16:32:28.490: Rx: ?#?#?#?#
16:32:29.502: Tx: ?200?201?203
16:32:29.518: Rx: ?#?#?#
16:32:30.531: Tx: ?200?201?203
16:32:30.547: Rx: ?#?#?#
16:32:31.561: Tx: ?200?201?203
16:32:31.577: Rx: ?#?#?#
16:32:32.583: Tx: !28,1,0,0,-1,0?200?201?203
16:32:32.598: Rx: !28,1,0,0,-1,0?#?#?#
16:32:33.610: Tx: ?28?200?201?203
16:32:33.625: Rx: ?#?#?#?#
16:32:34.639: Tx: ?200?201?203
16:32:34.654: Rx: ?#?#?#
16:32:35.667: Tx: ?200?201?203
16:32:35.683: Rx: ?#?#?#
16:32:36.694: Tx: ?200?201?203
16:32:36.708: Rx: ?#?#?#
16:32:37.710: Tx: /27/28/14?200?201?203
16:32:37.726: Rx: /#/#/#?#?#?#
16:32:38.735: Tx: ?200?201?203
16:32:38.750: Rx: ?#?#?#
16:32:39.761: Tx: !6,1,0,0,-1,0!7,1,1,0,-1,0!8,1,0,0,-1,0!2,9,1!3,9,1!27,1,1,0,-1,0!28,1,0,0,-1,0!202,10,0,1!37,1,1,0,-1,0?200?201?203
16:32:39.787: Rx: !6,1,0,0,-1,0!7,1,1,0,-1,0!8,1,0,0,-1,0!2,9,1!3,9,1!27,1,1,0,-1,0!28,1,0,0,-1,0!202,10,#,#!37,1,1,0,-1,0?#?#?#
16:32:40.801: Tx: ?6?7?8?2?3?27?28?200?201?202?203?37
16:32:40.816: Rx: ?#?#?#?#?#?#?#?#?#?#?#?#
16:32:41.827: Tx: ?2?3?200?201?202?203
16:32:41.842: Rx: ?#?#?#?#?#?#
16:32:42.851: Tx: !6,1,1,0,-1,0!8,1,1,0,-1,0!28,1,1,0,-1,0?2?3?200?201?202?203
16:32:42.883: Rx: !6,1,1,0,-1,0!8,1,1,0,-1,0!28,1,1,0,-1,0?#?#?#?#?#?#
16:32:43.891: Tx: ?6?8?2?3?28?200?201?202?203
16:32:43.907: Rx: ?#?#?#?#?#?#?#?#?#
16:32:44.916: Tx: ?2?3?200?201?202?203
16:32:44.932: Rx: ?#?#?#?#?#?#
16:32:45.945: Tx: ?2?3?200?201?202?203
16:32:45.960: Rx: ?#?#?#?#?#?#
16:32:46.978: Tx: ?2?3?200?201?202?203
16:32:46.989: Rx: ?#?#?#?#?#?#
16:32:48.003: Tx: !10,1,1,0,-1,0!12,1,1,0,-1,0!13,1,1,0,-1,0?2?3?200?201?202?203
16:32:48.014: Rx: !#!12,1,1,0,-1,0!13,1,1,0,-1,0?#?#?#?#?#?#
16:32:49.026: Tx: ?10?12?2?3?200?201?202?203?13
16:32:49.040: Rx: ?#?#?#?#?#?#?#?#?#
16:32:50.051: Tx: ?2?3?200?201?202?203
16:32:50.067: Rx: ?#?#?#?#?#?#
16:32:51.079: Tx: ?2?3?200?201?202?203
16:32:51.095: Rx: ?#?#?#?#?#?#
16:32:52.109: Tx: ?2?3?200?201?202?203
16:32:52.125: Rx: ?#?#?#?#?#?#
16:32:53.132: Tx: !12,1,1,0,-1,0?2?3?200?201?202?203
16:32:53.146: Rx: !12,1,1,0,-1,0?#?#?#?#?#?#
16:32:54.160: Tx: ?12?2?3?200?201?202?203
16:32:54.175: Rx: ?#?#?#?#?#?#?#
16:32:55.188: Tx: ?2?3?200?201?202?203
16:32:55.203: Rx: ?#?#?#?#?#?#
16:32:56.205: Tx: ?2?3?200?201?202?203
16:32:56.221: Rx: ?#?#?#?#?#?#
16:32:57.222: Tx: ?2?3?200?201?202?203
16:32:57.238: Rx: ?#?#?#?#?#?#
16:32:58.248: Tx: !9,1,1,0,-1,0?2?3?200?201?202?203
16:32:58.264: Rx: !9,1,1,0,-1,0?#?#?#?#?#?#
16:32:59.284: Tx: !6,1,0,0,-1,0!7,1,0,0,-1,0!8,1,0,0,-1,0!27,1,0,0,-1,0!28,1,0,0,-1,0!37,1,0,0,-1,0?9?2?3?200?201?202?203
16:32:59.310: Rx: !6,1,0,0,-1,0!7,1,0,0,-1,0!8,1,0,0,-1,0!27,1,0,0,-1,0!28,1,0,0,-1,0!37,1,0,0,-1,0?#?#?#?#?#?#?#
16:33:00.319: Tx: /6/7/8/2/3/27/28/37?200?201?202?203
16:33:00.334: Rx: /#/#/#/#/#/#/#/#?#?#?#?#
16:33:01.347: Tx: ?200?201?202?203
16:33:01.362: Rx: ?#?#?#?#
16:33:02.375: Tx: ?200?201?202?203
16:33:02.390: Rx: ?#?#?#?#
16:33:03.392: Tx: ?200?201?202?203
16:33:03.408: Rx: ?#?#?#?#
16:33:04.410: Tx: ?200?201?202?203
16:33:04.425: Rx: ?#?#?#?#
16:33:05.431: Tx: ?200?201?202?203
16:33:05.447: Rx: ?#?#?#?#
16:33:06.460: Tx: ?200?201?202?203
16:33:06.476: Rx: ?#?#?#?#
16:33:07.485: Tx: ?200?201?202?203
16:33:07.501: Rx: ?#?#?#?#
16:33:08.507: Tx: ?200?201?202?203
16:33:08.522: Rx: ?#?#?#?#
16:33:09.537: Tx: ?200?201?202?203
16:33:09.553: Rx: ?#?#?#?#
16:33:10.560: Tx: ?200?201?202?203
16:33:10.576: Rx: ?#?#?#?#
16:33:11.585: Tx: ?200?201?202?203
16:33:11.601: Rx: ?#?#?#?#
16:33:12.611: Tx: ?200?201?202?203
16:33:12.627: Rx: ?#?#?#?#
16:33:13.628: Tx: ?200?201?202?203
16:33:13.643: Rx: ?#?#?#?#
16:33:14.650: Tx: ?200?201?202?203
16:33:14.665: Rx: ?#?#?#?#
16:33:15.667: Tx: ?200?201?202?203
16:33:15.683: Rx: ?#?#?#?#


   
ReplyQuote
(@pbruno3)
Reputable Member Admin
Joined: 6 years ago
Posts: 341
 

Hmmm, that is odd. The application is defining ports but the interface is then saying the ports don't exist. What versions of the application, interface wiring map, and interface firmware are you using?


   
ReplyQuote
Share: