OK... cool. I'm sorry about the 45H, 45J, 45L, etc. These are versions of our firmware that we release over time. We usually leave older versions avai...
Hi, Thanks again for the response. I was able to see your video (the forum blocks new users from posting links to reduce SPAM - which has been a pro...
Hi. Likewise, thank you for reaching out. We completely understand how expensive, confusing (and frustrating sometimes) brewery automation can be... b...
No, this is working in v 1.1 Build 9.
Well shoot... I wonder if we added this along the way and didn't document it correctly. We plan on releasing a 1.2 Beta within a few days... so perh...
For your second question, the interpreter can only do math on two objects at a time... try: MT = "Fill MT with " + strMT += "gallons of water"
@piggles22 Yes, I just tried the example and it worked correctly. Not sure why it didn't work for you. My script (which I changed slightly from the ma...
Depending on the sketch you are using, if it works there it should in BruControl. 1-wire works reliably on ESP32 in our experience. Please remember ...
You figured it out before a response... nice work! Let us know if you need anything else.
Hi Roger, Thanks for reaching out! There are some changes that would need to be made, but I don't think it will be a ton of work for you. As far as ...
The QZ is 15" flange to tips. Add the gasket and you have a hair over 3/4" clearance... You can have the probe in between the elements without too muc...
OK... so I've done a fair amount of research on RIMs tubes as I implemented on the fly sparge water heating. That requires a lot of power for that pur...
Oh man this is one of my favorite topics... I can't respond right now but will within the next few hours! Keep an eye here.
Do you have a schematic you can share?
Maybe not wired correctly? What type of power supply is it? Wall warts are notoriously terrible. I'd recommend something more industrial quality. Swit...