Forum

Interface Setup Iss...
 
Notifications
Clear all

[Solved] Interface Setup Issues  


(@tgodsill)
New Member
Joined: 4 months ago
Posts: 2
Topic starter  

I'm trying to setup my RobotDyn 2560 to run on ethernet, but it will not communicate with BC.  I have everything setup as stated in the instructions, but it seems as though the IP address is wrong according to my computer's system drag.  I have entered the following in the setup:

MAC - AB:BC:CD:DE:EF:FA

IP - 192.168.1.223

GW - 192.168.0.1

SN - 255.255.255.0

My computer can see the Mega, but it seems to be assigning it a different address than what I have specified?  See attached pic.  Any help is welcome.  Thanks!

 


Quote
(@tgodsill)
New Member
Joined: 4 months ago
Posts: 2
Topic starter  

Solution:  desoldered D7 jumper on the back of the board.  Thanks for the help, Bryan!!


ReplyQuote
Share: