Power input/voltage regulation - Hardware https://brucontrol.com/community/hardware/power-input-voltage-regulation/ BruControl Discussion Board en Sat, 11 Apr 2026 05:02:42 +0000 wpForo 60 RE: Power input/voltage regulation https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-489 Sun, 03 Mar 2019 23:44:34 +0000 Then either a very short cycle length or a proportional SSR. 

]]> Hardware pbruno3 https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-489 RE: Power input/voltage regulation https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-484 Sun, 03 Mar 2019 19:28:07 +0000 Ok, good to know.

By oscillation, I mean the on/off cycles of the PID firing the electric element.  It creates a surging effect in the distillation column due.   

This was using an Auber PID

]]> Hardware tirini https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-484 RE: Power input/voltage regulation https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-482 Sun, 03 Mar 2019 19:12:40 +0000 Sorry, thought I responded to this. You can use a proportional SSR and get steady-State modulated Output. 

What do you mean by ‘Oscillation issues?’

]]> Hardware pbruno3 https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-482 Power input/voltage regulation https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-474 Fri, 01 Mar 2019 00:40:13 +0000 Is it possible to control output based on percentage of input/voltage? 

Similar to how a SSVR and rheostat/potentiometer setup would work?   We're looking to control the input for our nanodistillery boiler to avoid the oscillation issues we're seeing now when using our Auber PID.  

It looks like the BruController would definitely work for our brewing/mashing side of things.

]]> Hardware tirini https://brucontrol.com/community/hardware/power-input-voltage-regulation/#post-474