BruControl Forum

pbruno3

Group: Admin

Joined: March 18, 2017 11:05 pm

Estimable Member Admin

	👍 In forum Hardware	1 month ago
	Are you saying the ESP32 is working too, or just the 8266? In forum Hardware	1 month ago
	Looks like the firmware is loading correctly but the setup d... In forum Hardware	2 months ago
	Analog is your best bet right now. We'll add native I2C at... In forum Hardware	2 months ago
	Fair enough! In forum Hardware	3 months ago
	Great to hear! I know of another user or two who sourced che... In forum Hardware	3 months ago
	OK. At this point, I'm stuck. Without the schematic, devices... In forum Hardware	3 months ago
	Are the DC negatives tied together (blue wires)? In forum Hardware	3 months ago
	Yes, that is correct. All grounds should be tied to one poin... In forum Hardware	3 months ago
	Yes, all the DC negatives (grounds) should be tied. Optional... In forum Hardware	3 months ago
	Yes, the software is the same. PT100 amps use SPI communicat... In forum Hardware	3 months ago
	Again, its really difficult to diagnose without a schematic ... In forum Hardware	3 months ago
	Sounds like it does. The ve are power, the signal is likely ... In forum Hardware	3 months ago
	I don't think a opto-isolation is the problem. Without a sch... In forum Hardware	3 months ago
	It is likely a ground and/or noise isolation issue. Can you ... In forum Hardware	3 months ago

Page 1 / 16 Next

Forum Statistics

4 Forums

104 Topics

594 Posts

0 Online

82 Members

Forum Icons: Forum contains no unread posts Forum contains unread posts Mark all read

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed